|
Aqua
Pools, Ponds & Playthings, LLC |
|
|
|
|
|
Aqua
Pools, Ponds & Playthings, LLC |
|
|
|
|
|
|
| Once all of the air is pulled out of the
liner and it is where it needs to be, the main drain ring can be put
on. Be careful walking down the slope of the pool as it may be
slippery. Never walk inside of a vinyl liner pool with sharp
instruments. Do not throw things into the pool, but hand them in.
First, feel for the main drain. Second, using your fingers locate one of the screw holes. Place the ring over the main drain and start the first screw. Leave the screw loose enough so the ring will swivel around out of the way. Next, locate a screw hole on the other side. Slide the ring back around and put in that screw. Once two screws on opposite sides of the ring have been found, put in the remaining screws. Be sure the screws are tight. Be sure you don't slip with the screw driver and puncture the liner. ALWAYS PROTECT THE LINER. Once the ring is tight, using a utility knife cut away the liner on the inside of the ring and install the anti-vortex main drain cover. |
| Home | |
|
|
|
 |
|
Member
of the National Middle Tennessee Apartment Association